Ham Blog

Latest posts

Latest comments

How to Sharpen a Ham Knife | Tips from Years of Experience

3089 Views 0 Liked

HOW TO SHARPEN A HAM KNIFE

For many people, and especially for us, carving a unique piece such as acorn-fed Iberian ham is considered an art, and every part of the process is key to getting perfect slices and a perfect finish on this delicacy. For this, it is really important to know how to sharpen a ham knife, as it is an essential tool in our kit of knives for carving Iberian ham and the main reason knife and arm move as one when cutting, thanks to its sharpness. Looking after our professional ham knife is a must, like an artist looking after a brush when painting a perfect canvas.

The ham knife

As we already know, the ham knife is part of a perfect combination of quality tools that let us “carve” our masterpiece and then enjoy it slowly on the palate. This knife is long and quite flexible, so sharpening a ham knife is not like putting an edge on any other knife, since other knives are not usually as long or as flexible.

Stainless steel is a material that guarantees quality and long-term durability. A ham knife is normally a tool we use only occasionally, and stainless steel gives us the assurance that, if we look after the piece, we will have a knife that stays fully usable for years and years.

Sharpening a ham knife

To understand how to sharpen a ham knife, we start from the premise that we will use two tools that help us get this perfect edge, and we only need to learn when and how to do it.

Sharpened ham knife

Sharpening a ham knife with a stone

Sharpening a ham knife is considered quite a challenge because, as we have said, it is a very long and very flexible knife. It is essential to know how to press the edge onto the stone with your fingers, applying pressure. Why is this done? Very carefully, for the sharpening of the ham knife we press down properly on the part of the edge we are working on. This has to be done this way because any other knife, being less flexible, does not need it and is much easier to sharpen. If we do not press on the ham knife with our fingers, the stone will act only on the two points at the start and end of the section we are working on, because the knife will bend into a curve. Once we have pressed it down and the whole part of the edge is in contact with the stone, we slide it forwards and backwards. On knives this long, the sharpening of the ham knife is done section by section, the Japanese way, moving progressively from one section to the next until the whole blade is done.

Sharpening a ham knife with a sharpening steel

The sharpening steel has to run along the edge from start to finish to keep the best ham knife in shape. The front is the part we cut with, while the back is the part closest to the handle. Both parts, on both sides, need a perfect edge to keep our quality ham knife in the best condition. To do this, we make a continuous up-and-down movement of the knife along the steel, repeated several times. We always recommend sharpening the ham knife with protection, as you are working with seriously sharp tools and any kind of accident must be prevented.

Did you find this blog post helpful?
Posted in: Ham Carvers

Leave a comment

Security code